• head_banner_01

Products

  • LTZS Series Forward-curved Blade Single-inlet Shaft-driven Centrifugal Fan

    LTZS Series Forward-curved Blade Single-inlet Shaft-driven Centrifugal Fan

    LTZS series forward-curved blade single-inlet shaft-driven centrifugal fan is characterized by that the motor is located at the non air inlet side of the fan, the motor shaft is directly connected with the fan impeller, the motor does not contact with the conveying medium, the structure is simple and reliable, especially suitable for conveying clean gas, dangerous gas or other special gas.

  • LTZ Series Forward-curved Blade Double-inlet Shaft-driven Centrifugal Fan

    LTZ Series Forward-curved Blade Double-inlet Shaft-driven Centrifugal Fan

    LTZ series forward-curved blade double-inlet shaft-driven centrifugal fan adopts a forward impeller directly connected with motor located outside through long shaft. The air enters from both sides at the same time. The structure is simple and reliable. At the same time, the resistance at the inlet of the fan is reduced, and the rated air volume and efficiency of the fan are increased .

  • LTZM Series Double Volute Forward Shaft Drive Centrifugal Fan

    LTZM Series Double Volute Forward Shaft Drive Centrifugal Fan

    LTZM series double volute forward shaft drive centrifugal fan adopts the special structure that the impellers of two double inlet centrifugal fans are directly connected to the long shaft of the same motor, reduces the volume of the whole machine, and can obtain larger ventilation volume under the condition of small installation space.

  • LTZNH Series Back-curved Blade Single-inlet Shaft-driven Centrifugal Fan Without Volute

    LTZNH Series Back-curved Blade Single-inlet Shaft-driven Centrifugal Fan Without Volute

    LTZNH series back-curved blade single-inlet shaft-driven centrifugal fan without volute adopts no volute and can be directly installed in the equipment requiring ventilation or placed in any size of bellows. In this kind of special working situation, its efficient working area is wider than that of ordinary centrifugal fan, and its noise is lower. In addition, because the direction of its air flow is not limited by the volute, it can be used to replace large-diameter fans by simply installing several fans in the same air box to compose of a fan group, so as to reduce the noise and volume of the whole unit.

  • LTW Series Forward-curved-blade Double-inlet Centrifugal Fan With Outer Rotor Motor

    LTW Series Forward-curved-blade Double-inlet Centrifugal Fan With Outer Rotor Motor

    LTW series fans are centrifugal fans with forward-curved-blade, double-inlet, with external rotor motor placed in the air stream, provided with impulse turbines with a large number of narrow, direct-drive blades.

  • LTWD Series Duct Fan With External Rotor Motor

    LTWD Series Duct Fan With External Rotor Motor

    LTWD series duct fan with external rotor motor adopts square inlet and outlet flange. Its shape is similar to a section of air duct. It can be directly installed in the ventilation duct without ground installation foundation. It is very convenient to install, operate and maintain.

  • LTWS Series Forward-curved-blade Single-inlet Centrifugal Fan With External Rotor Motor

    LTWS Series Forward-curved-blade Single-inlet Centrifugal Fan With External Rotor Motor

    LTWS series forward-curved-blade single-inlet centrifugal fan with external rotor motor adopts a single air inlet structure, which is especially suitable for the working conditions of single air inlet, such as ceiling installation, wall installation or inside-box installation.

  • LTB Series Forward-curved Blade Double-inlet Belt-driven Centrifugal Fan

    LTB Series Forward-curved Blade Double-inlet Belt-driven Centrifugal Fan

    LTB series forward double air inlet belt driven centrifugal fan adopts a forward impeller with belt driven. The motor is located outside the volute and drives the fan impeller to rotate by the way of belt driven.

  • LTBH Series Backward-curved Blade Double-inlet Belt-driven Centrifugal Fan

    LTBH Series Backward-curved Blade Double-inlet Belt-driven Centrifugal Fan

    LTBH series backward double air inlet belt driven centrifugal fan adopts a backward impeller with belt driven. The motor is located outside the volute and drives the fan impeller to rotate by the way of belt driven. The proper transmission ratio can make the rated working point of the fan match the required working condition well, improve the overall efficiency of the unit, and achieve the purpose of energy saving and environmental protection.

  • LTBM Series Forward-curved Blade Double-volute Belt-driven Centrifugal Fan

    LTBM Series Forward-curved Blade Double-volute Belt-driven Centrifugal Fan

    LTBM series double volute forward belt drive centrifugal fan is comprised of connected volute and impeller of two sets of double inlet centrifugal fans, with one motor used to drive two sets of impellers through belt drive at the same time. The structure greatly reduces the volume of the whole machine and can obtain a large ventilation volume in a small installation space.